This Y83/T-125Z Aluminum scrap metal balers are the most popular product of our company. It’s highlight resides in that the compressed bale density is higher than that of any other type of balers. The bale is tight, compact and density is very high.
Our scrap metal baler is configured with shearing blades on the lid and sides of compress room. Therefore, the large sized material can be cut first and then be compressed. The bale discharging method is side push out, improving the safety of operation and making the bale convenient for transportation.
Technical parameters:
Aluminum scrap metal Balers |
|
Model |
Y83/T-125Z |
نیروی هل دادن سیلندر |
125ton |
Maximum working pressure |
25MPa |
اندازه اتاق را فشرده کنید |
1400×700×700mm |
Bale dimensions (L×W×ح) |
250 × 250 میلی متر |
موتور |
22kW |
Capacity |
4ton/h |
Theoretical dry cycle time |
100 |
حداکثر ضخامت را می توان فشار داد |
3 میلی متر |
Operation method |
کنترل خودکار PLC |
Bale discharging method |
بیرون بزن |
Baler dimensions (L×W×ح) |
4300×2700×2100mm |
Weight |
6500 کیلوگرم |
1. This side push out baler adopts the hydraulic drive system, reasonable design and compact structure. It is characterized by small volume, light weight, small inertia of movement, low noise, high moving stability, operating flexibility and other strong points.
2. With the incorporated hydraulic and electrical control, this machine is user-friendly and it is easy to realize the overload protection.
3. It is well adapted to different working conditions and has wide applicable range, like processing equipment in the metal recycling and processing unit, furnace charge processing machine in foundry, etc.
4. دستگاه فشار دهنده کنار ما صرفه جویی در انرژی ، مناسب برای نصب ، ایمن ، قابل اعتماد و کارآمد در هنگام کار است.
Brief Introduction of Baling Process
At first, the waste material for baling should be loaded into the compacting box manually or mechanically. The Lid cylinder starts to revolve the Lid to the right position for sealing the compacting box completely. Then the ejectors of the side cylinder and the main cylinder squeeze the waste materials into bale. Relying on the locking door cylinder, the locking door will be opened. The ejector of the main cylinder will push the bale out of the compacting box, finishing the baling process.
موارد اختیاری
Conveyor Feeding
بخاری روغن
Oil cooler
موتور دیزل
Applications
Non Ferrous Metals
Coppers
Aluminum Cans
پنجره های آلومینیومی
ضایعات آلومینیوم
طبل 25 لیتری
Tin Cans
تراش های استیل
تراشه های آلومینیوم
ورق های آلومینیوم
سیمهای آلومینیومی و مسی